Tweet
Dear SolidCAM Team and Partners,
As an Integration to a Robotic Solution (Simulation & Gcode Generation), SolidCAM ltd. creates the Interface to the third Party Software.
The Third-Party Software is not a part of a SolidCAM License and has to be purchased independently from the Producer.
The interface license has to be purchased from SolidCAM.
In general, in an Integration to a Robotic Solution, the calculated toolpath by SolidCAM is transferred to the Robotic application, which converts it to Kinematic robot moves and simulates it.
The CAD 3D Data includes the Design, Stock, and Fixtures models - these Data are exported in the format of the specific Robotic Solution.
SolidCAM's Toolpath is provided in a neutral Format - the Robotic Solution generates the specific G-code for the Robot.
SolidCAM has an output interface to Eureka Robot: https://solidcam.box.com/s/l50tgl0ju...1zrwpjss6d6oq0
We are in the process of creating an output interface to Robotmaster: https://www.robotmaster.com/en
Harald Schumacher
As an Integration to a Robotic Solution (Simulation & Gcode Generation), SolidCAM ltd. creates the Interface to the third Party Software.
The Third-Party Software is not a part of a SolidCAM License and has to be purchased independently from the Producer.
The interface license has to be purchased from SolidCAM.
In general, in an Integration to a Robotic Solution, the calculated toolpath by SolidCAM is transferred to the Robotic application, which converts it to Kinematic robot moves and simulates it.
The CAD 3D Data includes the Design, Stock, and Fixtures models - these Data are exported in the format of the specific Robotic Solution.
SolidCAM's Toolpath is provided in a neutral Format - the Robotic Solution generates the specific G-code for the Robot.
SolidCAM has an output interface to Eureka Robot: https://solidcam.box.com/s/l50tgl0ju...1zrwpjss6d6oq0
We are in the process of creating an output interface to Robotmaster: https://www.robotmaster.com/en
Harald Schumacher
Comment