Tweet
iMachining 2D - Simultaneous milling with the fourth rotary axis
Dear SolidCAM Team and Partners.
We, the Сam Systems company, are a SolidCAM reseller on the territory of the Russian Federation.
Our team helped implement the project using iMachining.
The task was to reduce the time of roughing the teeth of the part on a 3-axis milling machine, with a fourth rotary axis (rotary table).
Using the classical milling method, the roughing was 170 minutes, and three end mills were required for this processing.
We used Imachining and simultaneous operation of the fourth axis (rotary table).
The roughing time with Imachining was 100 minutes, and three workpieces were processed with one end mill.
Look what happened: https://www.youtube.com/watch?v=4KjQraLtZ-c&t=567s
Konstantin Stepanov
CAM Systems
We, the Сam Systems company, are a SolidCAM reseller on the territory of the Russian Federation.
Our team helped implement the project using iMachining.
The task was to reduce the time of roughing the teeth of the part on a 3-axis milling machine, with a fourth rotary axis (rotary table).
Using the classical milling method, the roughing was 170 minutes, and three end mills were required for this processing.
We used Imachining and simultaneous operation of the fourth axis (rotary table).
The roughing time with Imachining was 100 minutes, and three workpieces were processed with one end mill.
Look what happened: https://www.youtube.com/watch?v=4KjQraLtZ-c&t=567s
Konstantin Stepanov
CAM Systems