Announcement

Collapse
No announcement yet.

Up-To-Date SolidCAM2021 Post-Processor training webinar - Part 2

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Up-To-Date SolidCAM2021 Post-Processor training webinar - Part 2



    Up-To-Date Post-Processor webinar - Part 2 presented by Mladen Otasevic and Daniel Djurica.

    Download the parts click here

    00:00 - Starting soon

    01:25 - Introduction

    05:05 - New parameter page added under Working Style into .VMID - "ToolKit"

    13:15 - Using user_tool_offset in SC2021

    16:53 - hupos is restored in @drill_point procedure

    20:00 - Using variables Tool_origin_position_x,y,z for tool origin position

    24:35 - Showing new variables station_name_in_turret and station_angle_in_turret

    28:50 - behind the scenes on the part_tool_tag, next_tool_tag_on_turret, next_part_tool_tag_on_turret variables

    33:22 - Handling the 4x Face with tilt plane parameter

    42:22 - Using get last job number in channel

    44:45 - Effective management of Drive Units output - is_drive_unit_shared

    48:40 - Effective management of Drive Units output - is_last_job_using_drive_unit





    In this webinar series, we are demonstrating the most usable get functions and how to practically use them in every Post-Processor.

    There are also a lectures on how to handle the conversion between versions and support new features available in SolidCAM 2021.



    The webinar series is targeted to all who already have knowledge about the basics of GPPL Syntax.



    SolidCAM Settings application: https://www.evernote.com/l/Al3IK9i1-z5Lb7nSrz9CkKUNl6S5u2JHuNM/

    Presentation tool used in the webinar: https://www.evernote.com/l/Al39itppFkxL5J39UDdhkOZAp94IXePQXpQ/
Working...
X