Announcement

Collapse
No announcement yet.

Solid Probe - The Essential Module for Part Setup & On-Machine Measurement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Solid Probe - The Essential Module for Part Setup & On-Machine Measurement


    SolidCAM's integrated Solid Probe module enables you to do Home Definition (Setup) and On-Machine Verification (Measurement).

    Driving your probe on your CNC machine, Solid Probe enables you to do Setup and to quickly and easily measure the quality of your parts right on your machine, without breaking your setup. Solid Probe also provides Tool Presetter support.

    Solid Probe provides full visualization of all probe movements in SolidCAM's Machine Simulation, to avoid any potential damage to the Probe tool.
    Solid Probe is a must module for every Machinist using Probes


    The Probe Module That Does it All:
    • Easy Home Definition and On-Machine Verification - Measure your parts right on your machine
    • Tool Presetter Support
    • Easily select on your solid module the Geometry that you need to measure
    • Supports a wide range of Probe Cycles with User-Defined Parameters
    • Fully visualize all your Probe Tool Movements in Simulation


    Define Your Probing Operations, together with the Machining operations, right in the SolidCAM CAM-Manager


    Define both Probe and Machining operations in the SolidCAM CAM-Manager and even use the same geometry selection for either type of operation.

    When your Solid Model is changed, both the Machining and Probe operations are automatically updated to use the new geometry.
    Controller Probe Cycles


    Use the same geometry as your 2.5D milling operations with full control over tolerances, multiple sorting options, and a direct preview of cycle movements.




    Preset Your Tools


    Use Solid Probe's Tool Presetter to check your cutting tools between machining operations and tool changes.
    Home Setup Definition


    Choose from 16 different cycles to easily define your home positions, replacing time-consuming, manual setup procedures.




    On-Machine Verification


    Measure your machined surfaces and features without transferring the part to a Coordinate Measurement Machine - inspect your part right on your machine, without breaking the setup.



    Solid Probe Cycles Simplify Your Measurements


    Choose from multiple Probe Cycles to handle your various measurement challenges and provide smooth workflows with SolidCAM machining operations.


    Choose Your Measurement Output


    After probing, the Probe Controller documents the results in a Measurement log, that you view onscreen or save to a file.

Working...
X