SolidCAM2021 New Simulator Webinar

[emilsomekh]

Register now for the 'What's New in SolidCAM 2021 - NEW SolidCAM Simulator' webinar -

Presented by Anthony Calderone

DATE: February 11, 2021
TIME: 1:00 pm GMT / 8:00 am US Eastern

---

We are excited to announce and present the NEW SolidCAM Simulator.

The all new SolidCAM Simulator merges all previous Simulation Modes into a single environment, and takes advantage of today's 64-bit Multi-core CPU architecture and Multi-Monitor environment.

From parallel loading of Simulation data, to parallel solid verification calculation, the SolidCAM Simulator will utilize today's CPUs to maximum extent.

The new Simulator is also "fully self-contained", allowing you to keep it open and working during your entire CAM session.

This exciting webinar will highlight the following:

• 64-bit Multi-Core support
• Multi-Monitor support
• Embedded graphics into SolidWorks Graphics View
• High Quality rendering
• Default Themes to match existing modes; Solid Verify, 3D Simulation, 2D Turning
• "Heavy Part" Theme that is optimized for large models or complex HSM/HSS/5-axis toolpaths
• "Machine Time" mode to play simulation at real machining time, with controllable playback speed factor
• Intuitive "Compare Stock to Target", to easily visualize remaining stock amounts
• Play simulation in reverse, with Solid Verify adding material back for each tool movement
• Pickable Toolpath and Tool Dragging

[emilsomekh]

Hi Emil, Anthony,

Today's SolidCAM2021 New SolidCAM simulator webinar is now on YouTube, uploaded to Box and in our website in both the 'Latest Webinars' area and 'Resellers Area'.

Links for the YouTube version and Box download are below:

YouTube: https://youtu.be/z-jPzK2X7a0

Download: https://solidcam.box.com/shared/stat...351ggl6nuz.mp4

Part: https://solidcam.box.com/s/gtn9zzsyt...sqxdeukoeu6aoq

Thanks,
Jack Maner
Media Manager
SolidCAM Inc.
[email protected]
Skype: jack.maner

[emilsomekh]

Dear SolidCAM Team and Partners,

A major addition that we are now working on adding to the simulator, in a coming SolidCAM2021 SP version, is multi-channel simulation.

The multi-channel simulation will provide users working on multi-channel CNC machines (Advanced mill-turn and Swiss type CNCs), a very fast and user friendly simulation tool, that will enhance and empower the whole user experience, while defining the various operations and doing synchronization between them.

See the figure, showing a sneak peek of the coming Multi-Channel Simulation.

https://solidcam.box.com/s/hwlmzxzrq...of9rkcg3h4co2v

Best Regards,
Emil Somekh